Everyday Home Projects
1X12, 2 FTA9-1/2"A11-1/4"1X4, 6 FTB17-3/4"BBB3-1/2"1X4, 6 FTB17-3/4"BB3-1/2"HATCHED = OFFCUT 1X12, 2 FTA9-1/2"A11-1/4"1X4, 6 FTB17-3/4"BBB3-1/2"1X4, 6 FTB17-3/4"BB3-1/2"HATCHED = OFFCUT · WIDTHS 2×
  1. General notes
  2. All dimensions in inches
  3. Slats 17-3/4 so four fit a 6 ft board
  4. Ends 16-1/4 apart inside
  5. Pilot hole for every screw
Drawn for
Everyday Home Projects
Free plan
Nº 07
Title

Storage Crate

Two ends and seven slats, 18 inches long
Level
Beginner
Time
2 hours
Drawn by
James
Sheet
1 of 2

Sheet 2 · The build

A slatted crate for the garage, pantry or porch. It's two solid ends and seven identical slats, held together with glue and screws, and every cut is a straight crosscut.

The finished pine storage crate with slatted sides and hand-hold cutouts, sitting on a workbench
What you're building: the finished storage crate.

Tools

  • Saw and speed square
  • Drill with a pilot bit and countersink bit
  • Tape measure, pencil, sandpaper
  • Jigsaw or coping saw and a 1" bit (for the optional handles)

Materials

  • One 1x12 board, 2 ft
  • Two 1x4 boards, 6 ft each
  • 28 screws, 1-5/8"
  • Wood glue

Cut list

PartNameQtySize
End23/4 × 11-1/4 × 9-1/2
Slat73/4 × 3-1/2 × 17-3/4

Sizes in inches: thickness × width × length

Steps

Shop note

Don't skip the pilot holes. A screw this close to the end of a slat will split it without one.

Resources I recommend

These are affiliate links. If you buy through them I may earn a commission, at no extra cost to you. The free plans stay free either way.